Butyl tape

Product description: butyl tapes are made from butyl rubber as main raw material, match with other additives, through a special process to produce a kind of environment-friendly lifelong not curing adhesive type waterproof sealant, of all kinds of material surface has a strong cohesive force, at the same time it has excellent weather resistance, aging resistance and waterproof, the glued surfaces have a seal, vibration reduction, protection, and so on.Because it contains no solvent, so it does not shrink, will not emit toxic gas;It is an advanced waterproof material because of its lifetime non-curing, so it has excellent follow-through to the surface thermal expansion and cold contraction of the adhesive and mechanical deformation.

Ii. Application scope:

1) overlap between steel roof color steel plate and bright plate, and seal the connection of falling water gutter;.

2) installation of PC board and endurance board, bonding between EPDM, PE and other polymer materials;

3) sealing and waterproof treatment of steel structure and engineering tunnel structure with seam I;

4) sealing, shock absorption, sound absorption and noise reduction in speaker speaker system of electronic industry;

5) anti-seismic seal in automobile air conditioner, refrigerator and freezer;

6) waterproof seal in wind power industry and ship manufacturing industry.Iii. Performance advantages:

1) it can maintain permanent flexibility and adhesion, can withstand a certain degree of displacement, and has good shape tracking;

2) excellent waterproofing, sealing, chemical corrosion resistance and uv (sunlight) resistance;Service life of more than 20 years;

3) easy to use, accurate dosage, reduce waste, excellent cost performance;

4) no solvent, safe and environmentally friendly.

5) never solidify, can maintain permanent flexibility and self-adhesiveIv. 

Construction method:

1) according to the type of color steel plate or the gap of the joint, choose suitable waterproof tape according to the requirements of the engineering design;

2) water, oil, dirt and other impurities on the surface of the color steel plate must be completely removed before pasting to keep the pasted surface clean;

3) from one end of the color steel plate, open the double-sided tape along the seam into a straight line to stick the tape to the lap joint of the lower plate, and then press the tape from light to heavy by hand to make it firmly bonded with the color steel plate;

4) tear off the upper layer isolation paper of the adhesive tape, press the color plate steel plate on the upper layer of the interface into the joint, and then squeeze the joint in sequence to make the joint stick firmly and seal tightly.